Skip to content

Texas builders, landscape architects and irrigation contractors

Stamped irrigation plans for any Texas city

One state rule, one licensed seal. We draw and seal your irrigation plan for any city in Texas.

Fix your sprinklers

Every new sprinkler system in Texas needs a plan sealed by a licensed irrigator. That is a state rule, so it applies in every city, from El Paso to Houston. SISCO Irrigation draws and seals these plans under Texas license LI 31500.

We work for builders, irrigation contractors, landscape architects, pool builders and property owners. You send the drawings. We send back a sealed plan your installer can build from.

The state sets the design rules. Each city decides how it reviews the plan. Tell us what your city or reviewer asks for. We prepare the plan to meet it.

Residential irrigation plans

We draw plans for single homes and for groups of lots. Each plan fits the lot, the landscape plan and the local watering rules. Builders who send us many lots get the same layout standards on every one. Homeowners putting in a new system can send us one lot. See irrigation plans for homes and home builders.

Commercial irrigation plans

Shops, offices, apartments and shared areas need a sealed plan too. These sites carry more zones, bigger pipe and a bigger meter, and some cities add rules for them. See irrigation plans for commercial sites.

What you send

The site plan, with the lot lines and the water meter.

The landscape plan, with the lawn, beds and trees.

Your notes, such as the water pressure, the meter size and any local rules you know of.

What you get back

A sealed irrigation plan drawn to your layout. It shows the zones by plant type, the heads and drip, the pipe sizes, the pressure control, the backflow device, the controller and the rain sensor. It carries the legend, the scale and the irrigator's seal, signature and date. See a sample irrigation plan.

How it works

  1. Email the site plan and the landscape plan to service@siscoirrigation.com.

  2. We confirm the scope and ask any questions.

  3. We draw the plan and seal it under license LI 31500.

  4. Your installer builds from it, and files it where the city asks for one.

  5. If the reviewer has comments, we revise the drawings.

Cities we know best

We have read each of these cities' own rules. Each has its own page.

San Antonio. SAWS reviews the plan before the system goes in, and inspects it after. See irrigation plans for San Antonio.

Austin. Austin Water inspects new systems at single-family homes. See irrigation plans for Austin.

Dallas. The city asks for a permit and two sets of sealed plans, drawn to its checklist. See irrigation plans for Dallas.

Houston. The city asks for a plumbing permit and inspects the finished system on site. See irrigation plans for Houston.

Fort Worth. The city asks for a permit, a plan on site and a signed 13-item checklist. See irrigation plans for Fort Worth.

El Paso. The city asks for two plan sets, and for a stamped plan at the final inspection. See irrigation plans for El Paso.

Arlington. A scaled plan goes in with the permit, and the city inspects twice. See irrigation plans for Arlington.

Frisco. Plans go through an online review, and the backflow test comes before the inspection. See irrigation plans for Frisco.

Georgetown. A sealed plan is uploaded with the permit, and a new meter needs as-built plans. See irrigation plans for Georgetown.

Corpus Christi. A sealed plan goes in with the permit, and the city's form lists eleven items. See irrigation plans for Corpus Christi.

Round Rock. New homes must pass the sprinkler inspection before the final, and business sites are checked every three years. See irrigation plans for Round Rock.

Every Texas city, by region

We draw plans for all 1,224 cities and towns in Texas. Pick your region to see every city we serve there.

Dallas, Fort Worth and North Texas. 273 cities and towns in 21 counties.

Houston and the Upper Gulf Coast. 139 cities and towns in 14 counties.

Beaumont and Southeast Texas. 34 cities and towns in 7 counties.

Tyler, Longview and East Texas. 158 cities and towns in 30 counties.

Austin and Central Texas. 77 cities and towns in 11 counties.

Waco, Killeen and the Brazos Valley. 107 cities and towns in 19 counties.

San Antonio and the Hill Country. 75 cities and towns in 19 counties.

Corpus Christi and the Coastal Bend. 51 cities and towns in 16 counties.

The Rio Grande Valley and the border. 59 cities and towns in 11 counties.

El Paso and far West Texas. 18 cities and towns in 8 counties.

Midland, Abilene and West Central Texas. 96 cities and towns in 39 counties.

Amarillo, Lubbock and the Panhandle. 137 cities and towns in 49 counties.

Outside city limits

Building outside any city limit? We still draw the plan. The state rule covers every part of Texas, and we find out what your local reviewer needs. See how plan review differs by Texas city, or ask for a plan quote.

Plans by trade

We prepare plans for irrigation contractors and landscapers, landscape architects and pool builders. You keep your customer. We supply the sealed plan.

What the state rules require

The plan must be sealed, signed and dated by a licensed irrigator. A copy stays on site during the work. New automatic systems need a rain or moisture sensor in most of the state, an isolation valve and backflow protection. Heads sit at least 4 inches from pavement, and no spray may land on walls, fences or streets.

We draw to these rules from the start. See the full list of Texas irrigation plan requirements.

Plans questions

Can you seal a plan for any city in Texas?

Yes. The license is a Texas license, and the design rules are the same across the state.

Do you do both residential and commercial plans?

Yes, both. We draw residential plans for single homes and groups of lots, and commercial plans for business sites.

What if my city has its own checklist?

Send it with your drawings. We prepare the plan to that checklist.

Do you handle review comments?

Yes. If the reviewer asks for changes, we revise the drawings.

Send us one project

Email service@siscoirrigation.com with the site plan and the landscape plan. Or reach out to the irrigation experts at SISCO Irrigation at 210-697-9086.

Verified details

Texas requires an irrigation plan for every new landscape irrigation system, sealed, signed and dated by a licensed irrigator, kept on site during installation. The state design rules are the same in every city; review is local. SISCO prepares and seals plans under license LI 31500 for projects in any Texas city, and does not need to register in a city to supply plans. City facts were checked November 12, 2026 on each city's own website. Email service@siscoirrigation.com, phone 210-697-9086.