Skip to content

Builders, landscape architects and homeowners

Sample irrigation plan: what a sealed plan shows

Never seen an irrigation plan? Here is a sample, with every part explained.

Fix your sprinklers

What you are looking at

An irrigation plan is a map of a sprinkler system. It shows where every part goes before the work starts. Texas requires one, sealed by a licensed irrigator, for every new system.

Leer en español

The drawing on this page is a sample. The lot is made up. It carries no seal, because a seal goes only on a real plan for a real address.

The lot

The plan starts with the site. You see the lot lines, the house, the drive and the walk. You see the lawn and the beds. A north arrow shows which way the lot faces. A scale tells you how far apart things are.

The water supply

Find the water meter near the street. The sprinkler system ties in just past it. Next comes a shut-off valve, then the backflow device. The backflow device keeps yard water out of your drinking water.

The plan gives the size of the meter and the pressure the design is based on.

The zones

A zone is a group of heads that run together. The sample has six. Each one waters a single kind of area.

Back lawn: rotors, which throw water far and slow.

Front lawn, side yards and the strip by the street: spray heads, for small spaces.

Front beds and back bed: drip line, which waters the roots and not the air.

Each zone lists its flow in gallons a minute. Grass and beds never share a zone, since they need different amounts of water.

The heads and the pipes

Each head has its own symbol. The plan shows where each one sits and how far it throws. Heads are spaced so that each one reaches the next. Every head sits at least 4 inches from pavement.

Lines show the pipes. The main line runs from the backflow device to the valves. Smaller pipes run from each valve to its heads. Every pipe has its size marked.

The controller and the sensor

The controller is the timer. The sample shows it in the garage. A rain sensor sits on the outside wall, where rain can reach it. It stops the system when it has rained.

The legend and the notes

The legend is the key. It explains every symbol and line on the page. The notes list the rules the system is built to. They cover water pressure, pipe depth, head spacing and the water company's watering days.

The seal

On a real plan, the irrigator's seal goes in the corner, with a signature and a date. It means a licensed irrigator stands behind the design. Reviewers such as SAWS look for it first.

How to get your own plan

  1. Email the site and landscape plans to service@siscoirrigation.com.

  2. We confirm the scope and ask any questions.

  3. We draw and seal the plan, in as little as 3 days.

  4. The plan goes to the local reviewer.

  5. We answer comments and revise the plan.

See irrigation plans in San Antonio.

Sample plan questions

Can I use this sample plan for my own lot?

No. It is a made-up lot with no seal. Every real plan is drawn for one address.

What does the seal on an irrigation plan mean?

It means a licensed irrigator designed the system and stands behind it. Texas requires it.

How many zones does a home need?

It depends on the yard. Many homes have four to eight. Grass and beds get their own zones.

Who can draw an irrigation plan in Texas?

A licensed irrigator. SISCO draws and seals plans under license LI 31500.

Related pages

Start here: Irrigation plans in San Antonio.

Also useful: Request an irrigation plan quote. Irrigation plans for Arlington. SAWS steps for home builders.

Need a real plan?

Email service@siscoirrigation.com with the site and landscape plans. Or reach out to the irrigation experts at SISCO Irrigation at 210-697-9086, Monday to Friday, 7:30 a.m. to 4:30 p.m.