Texas builders and irrigation contractors
Irrigation plan review by Texas city
Same state rules, a different step in every city. Here is who asks for what.
Fix your sprinklersOne state rule, many city steps
Texas requires a sealed irrigation plan for every new sprinkler system. That rule is the same in every city. What changes is the local step. Some cities review the plan first. Some only inspect at the end. Some want a permit, and some want all three.
Here is how eleven Texas cities handle it, starting with the five largest. Last checked: November 12, 2026.
San Antonio
Permit: yes, from the City of San Antonio.
Plan review: yes. SAWS reviews the plan for every new system before it goes in. It aims to answer in five business days.
Inspection: yes. SAWS inspects systems put in since January 1, 2026.
Dallas
Permit: yes. Dallas calls it a master permit.
Plan review: yes. The city wants two sets of sealed plans and has its own plan checklist.
Timing: Dallas says a permit is normally issued in 1 to 3 working days.
Houston
Permit: yes, a plumbing permit. A master plumber or licensed irrigator registered with the city must pull it.
Plan review: Houston says it does not review the irrigation plan first.
Inspection: yes, on site. The sealed plan still has to be there.
Fort Worth
Permit: yes, for a new system or a change of 20 percent or more.
Plan: an irrigator must draw it before work starts, and a copy stays on site.
Checklist: the irrigator signs and seals a 13-item city checklist.
Austin
Inspection: yes. Austin Water inspects new systems at single-family homes.
Standards: the system is checked against Texas rules and City of Austin rules.
Six more cities, in one line each
Arlington: a city permit, with the plan sent in with the form. Two inspections, one before the trenches are filled.
Frisco: an irrigation permit with online plan review. The backflow device must pass before the sprinkler inspection.
Georgetown: an irrigation permit with a sealed plan uploaded online. The backflow test report is due within 72 hours.
Corpus Christi: a permit and a sealed plan. The city's inspection form has eleven items.
Round Rock: an irrigation permit that must pass before a new home's final inspection. Business sites are checked every three years.
El Paso: a permit for new systems and major repairs. The inspector asks for a plan stamped by a licensed irrigator.
What is the same everywhere
A plan sealed by a licensed irrigator. Backflow protection. A rain or moisture sensor on new automatic systems in most of the state. Heads at least 4 inches from pavement. No spray onto streets, walls or fences. Zones that match the plants.
SISCO draws to these rules, then adds what each city asks for. We send the plan to the local reviewer and answer the comments.
How to get a plan for any of these cities
Email the site and landscape plans to service@siscoirrigation.com.
Tell us the city and the water company.
We draw the plan to the state and city rules and seal it.
The plan goes to the local reviewer where one is required.
We answer comments and revise the plan.
City review questions
Which Texas cities review irrigation plans before installation?
San Antonio and Dallas do. Fort Worth requires the plan before work starts and on site. Houston inspects at the end.
Is the state rule the same in every city?
Yes. Texas sets the design rules and requires a sealed plan. Cities add their own permit and review steps.
My city is not listed. What do I do?
Ask the city's building office or the water company what they need. Tell us and we draw to it.
Can one irrigator seal plans for all of these cities?
Yes. The irrigator license is a Texas license. SISCO seals plans under LI 31500.
Related pages
Start here: Irrigation plans in San Antonio.
Also useful: Irrigation plans anywhere in Texas. SAWS steps for home builders. Sample irrigation plan.
Send us one project
Email service@siscoirrigation.com with the site and landscape plans. Or reach out to the irrigation experts at SISCO Irrigation at 210-697-9086, Monday to Friday, 7:30 a.m. to 4:30 p.m.
