Skip to content

Texas homeowners

How to find buried or lost sprinkler heads

Run the zone and look for wet spots, bubbling water or a patch of greener grass.

Fix your sprinklers
On this page

Why sprinkler heads disappear

Sprinkler heads sit flush with the soil, and over the years grass, thatch and soil build up over them. A buried head either cannot pop up or pops up under the turf and waters nothing. The usual sign is a dry patch in a zone that otherwise works, or a wet spot where water bubbles up with no head in sight.

Leer en español

How to find a buried head

  1. Run the zone and watch for water bubbling up, a wet spot or a patch that sinks underfoot.

  2. Look for the pattern: heads are usually spaced evenly and sit along edges and in corners.

  3. Measure the gap between two heads you can see, and pace the same distance to where the next should be.

  4. Probe gently with a screwdriver or a thin rod until you feel the hard plastic cap.

  5. Cut away the turf over the cap with a trowel and clear the soil around it.

Good to know: probe gently and straight down. A hard jab can crack a head or puncture the pipe beside it.

Other ways to find them

Greener circles: a head leaking under the turf leaves a small greener patch.

The plan: if you have the irrigation plan or as-built drawing, it shows every head. Texas requires a plan for every new system. So newer homes may have one.

A metal detector does not help much: most heads are plastic. It can help find a valve box lid or a wire path.

Once you find it

Clear the grass back so the cap is flush with the soil surface, not below it. If the head sits too low, raise it with a longer riser or a riser extension so the top is level with the ground. Then run the zone, check the head pops up fully and sprays the right way, and clean the nozzle if the pattern is poor.

If the zone is still weak

A buried head is sometimes not the real problem. A zone where every head is weak has a leak, a valve problem or too many heads. See our zone guide and leak guide.

Buried head questions

How do I find a sprinkler head that is buried?

Run the zone and look for bubbling water or wet spots, follow the spacing between visible heads, then probe gently for the plastic cap.

Why did my sprinkler head get buried?

Grass, thatch and soil build up over the cap over the years, most of all where turf is thick.

How do I raise a sprinkler head?

Fit a longer riser or a riser extension so the top of the head sits level with the soil surface.

Can a metal detector find sprinkler heads?

Rarely. Most heads are plastic. It can find valve box lids and wire paths.

Start here: All sprinkler guides.

Also useful: How to winterize a backflow preventer. Anti-siphon valve vs backflow preventer. How to adjust sprinkler heads.

Need help? Sprinkler repair in San Antonio.

Need a hand?

SISCO finds and raises buried heads across Greater San Antonio, Boerne and New Braunfels. Reach out to the irrigation experts at SISCO Irrigation at 210-697-9086 or see sprinkler repair.