Skip to content

Texas homeowners

How to adjust sprinkler heads: Rain Bird and Hunter

Spray heads adjust at the nozzle. Rotors adjust from a fixed stop: left on Rain Bird 5000, right on Hunter PGP.

Fix your sprinklers
On this page

Three things you can adjust on a sprinkler head

Every sprinkler head has up to three adjustments: the direction it points, the arc (the slice of circle it covers) and the radius (how far it throws). Which ones you can change, and how, depends on whether it is a spray head or a rotor. Run the zone while you adjust so you can see the result.

Leer en español

Spray heads (Rain Bird 1800, Hunter Pro-Spray)

Spray heads pop up and spray a fixed fan of water.

Direction: pull the riser up and twist it to aim the spray.

Radius: turn the small screw on top of the nozzle clockwise to shorten the throw.

Arc: the nozzle sets it, as a quarter, half or full circle. To change the arc, change the nozzle, or fit a variable arc nozzle and turn its collar.

Rain Bird 5000 rotors

On a Rain Bird 5000, the left edge of the arc is the fixed stop.

  1. Pull the turret up and turn it counterclockwise to the left stop.

  2. If the left edge is in the wrong place, turn the whole head on its fitting to line it up.

  3. Put a flat screwdriver or the Rain Bird rotor tool in the arc socket on top.

  4. Turn clockwise to widen the arc, about 90 degrees per full turn, or counterclockwise to narrow it.

  5. Shorten the throw with the radius screw over the nozzle.

Hunter PGP rotors

Hunter PGP rotors are the mirror image: the right edge is the fixed stop.

  1. Turn the turret clockwise to the right stop and hold it there.

  2. Put the plastic key end of the Hunter wrench in the adjustment socket.

  3. Turn clockwise to widen the arc, about 90 degrees per full turn.

  4. Shorten the throw with the radius screw over the nozzle, using the metal end of the wrench.

How to stop a head spraying the street

Aim the head first, then shorten the radius, then change to a nozzle with a smaller arc. A head that sits right against the pavement may need moving. Overspray counts as water waste under many Texas water companies' rules. In San Antonio, see the SAWS watering rules.

When adjusting won't fix it

A head that mists is running at too high a pressure. A head that barely reaches is on a zone with low pressure, a leak or too many heads. A rotor that won't turn has grit in its drive. See our sprinkler head guide.

Head adjustment questions

How do I adjust a Rain Bird sprinkler head?

On 1800 spray heads, twist the riser to aim and turn the nozzle screw to shorten the throw. On 5000 rotors, set the arc from the fixed left stop with a flat screwdriver in the socket on top.

How do I adjust a Hunter PGP sprinkler head?

Turn the turret to the fixed right stop, then use the Hunter key in the adjustment socket to widen or narrow the arc.

How do I reduce how far a sprinkler sprays?

Turn the radius screw on top of the nozzle clockwise. If that is not enough, fit a smaller nozzle.

Why won't my sprinkler head hold its adjustment?

Worn internal parts or a loose head on its fitting. Replacing the head is usually the fix.

Start here: All sprinkler guides.

Also useful: How to find buried sprinkler heads. How to winterize a backflow preventer. Sprinkler system basics in Texas.

Need help? Sprinkler repair in San Antonio.

Need a hand?

SISCO repairs and resets heads across Greater San Antonio, Boerne and New Braunfels. Reach out to the irrigation experts at SISCO Irrigation at 210-697-9086 or see sprinkler repair.