Skip to content

Homeowners with Rain Bird spray heads

Rain Bird 1800 spray head: adjust, clean and replace

Twist the stem to aim it. Turn the top screw to shorten the spray.

Fix your sprinklers

How this head works

The Rain Bird 1800 is a pop-up spray head. It rises when the zone runs and sprays a fixed fan of water. It does not turn. You can aim it, shorten it and clean it with your hands and a small screwdriver.

Leer en español

Aim it

Turn the zone on. Hold the stem and twist it until the left edge of the spray is where you want it. It takes a firm twist, and you will hear it click.

On an adjustable nozzle, turn the ridged ring on the nozzle to make the spray wider or narrower.

Shorten the spray

There is a small screw on top of the nozzle. Turn it clockwise to shorten the spray. You can cut the distance by up to 25 percent. Turn it the other way to lengthen it.

If the head still sprays the street, it needs a nozzle with a shorter throw.

Clean it

A weak or uneven spray often means a clogged filter.

  1. Turn the zone off.

  2. Pull the stem up and hold it.

  3. Unscrew the nozzle.

  4. Lift out the filter and rinse both parts.

  5. Put them back and run the zone.

Replace a broken head

Turn the zone off. Dig out 3 to 4 inches around the head. Unscrew the old head and check the pipe below it for cracks. Wrap plumber's tape on the threads and screw the new head on by hand. Run water for a few minutes to flush out dirt before you fit the nozzle. Fill the hole back in, then aim the head.

Before you dig more than a few inches, call 811 to have buried utilities marked. It is free in Texas.

Head keeps breaking, or leaks at the base? Reach out to the irrigation experts at SISCO Irrigation at 210-697-9086.

Rain Bird 1800 questions

How do I aim a Rain Bird 1800?

Twist the stem while the water is on, until the left edge of the spray is right.

How do I make it spray less far?

Turn the screw on top of the nozzle clockwise.

Why is the spray weak?

The filter under the nozzle is likely clogged. Unscrew the nozzle and rinse it.

What size do I buy to replace it?

Match the pop-up height of the old head. The common sizes are 2, 3, 4 and 6 inches.

Related pages

Start here: Sprinkler parts and models.

Also useful: Hunter X-Core controller. Rain Bird ESP-Me controller. Hunter Pro-C controller.

Need help? Sprinkler repair in San Antonio.

Need a hand?

We carry Rain Bird parts on the truck. See our sprinkler head guide for more. Repairs start from $150, depending on what your system needs. Reach out to the irrigation experts at SISCO Irrigation at 210-697-9086.