Skip to content

Homeowners with a Hunter Pro-C

Hunter Pro-C controller: how to set your watering day

One start time waters every zone. Most Pro-C problems come from having more than one.

Fix your sprinklers

What this timer can do

The Hunter Pro-C has three programs, called A, B and C. Each can have up to four start times. One start time runs every zone in that program, one after the other. Most homes need only program A and one start time.

Leer en español

Set it up

  1. Turn the dial to Date/Time and set today's date and time.

  2. Turn to Start Times and set one start time.

  3. Turn to Run Times and set the minutes for each zone.

  4. Turn to Water Days and pick your watering day.

  5. Turn the dial to RUN and leave it there.

Use the PRG button to pick program A, B or C. Use the plus and minus buttons to change a number.

Remove an extra start time

Sprinklers running twice, or in the middle of the night? There is likely a second start time. Turn the dial to Start Times. Go to the extra one. Press plus or minus until you reach 12:00 AM, then press once more. The screen shows OFF. Check programs B and C too.

Run a zone by hand

Turn the dial to Manual. Press the right arrow to reach the zone. Use plus and minus to set the minutes. Turn the dial back to RUN.

To run all zones, leave the dial on RUN. Press and hold the right arrow until Station 1 shows, then let go.

Change every zone at once

Turn the dial to Seasonal Adjust. It changes all run times by a percent, from 5 up to 300. Use it to cut back in fall and winter.

The rain sensor switch

The switch says ACTIVE or BYPASS. If the screen shows SENSOR OFF, the rain sensor is stopping the watering. Move the switch to BYPASS to test, then put it back.

What the error messages mean

NO AC: the timer has lost power and is on its battery. Check the outlet, the switch and the breaker.

A number and ERR: there is a fault on that zone, often a bad solenoid or a shorted wire.

P ERR: the master valve or pump circuit is drawing too much power.

Not sure what the screen is telling you? Reach out to the irrigation experts at SISCO Irrigation at 210-697-9086.

Pro-C questions

How many programs does a Hunter Pro-C have?

Three: A, B and C, with up to four start times each.

Why do my sprinklers run twice?

There is a second start time, or a second program is turned on.

What does NO AC mean on a Hunter Pro-C?

The timer has lost power. Check the outlet and the breaker.

How do I turn off the rain sensor?

Move the sensor switch to BYPASS.

Related pages

Start here: Sprinkler parts and models.

Also useful: Rain Bird 1800 spray head. Hunter X-Core controller. Rain Bird ESP-TM2 controller.

Need help? Sprinkler repair in San Antonio.

Want it set for you?

We set every timer to your watering day on each repair visit. In San Antonio, see the SAWS watering rules for your day. Repairs start from $150, depending on what your system needs. Reach out to the irrigation experts at SISCO Irrigation at 210-697-9086.