Homeowners with a Rain Bird ESP-TM2
Rain Bird ESP-TM2 controller: how to set your watering day
Five dial stops set an ESP-TM2: date, start times, run times, run days, then auto.
Fix your sprinklersOn this page
What this timer can do
The Rain Bird ESP-TM2 has three programs, called A, B and C. Each program can have up to four start times. It runs up to 12 zones. Most homes only need program A.
Set it up in five steps
Turn the dial to DATE/TIME and set today's date and time.
Turn to START TIMES and set when watering begins.
Turn to RUN TIMES and set the minutes for each zone.
Turn to RUN DAYS and pick your watering day.
Turn to AUTO RUN and leave it there.
Run times can be from one minute to six hours.
Set it for your SAWS day
Under SAWS rules, sprinklers run once a week on your day. On RUN DAYS, turn on only that day. Set your first start time for 5 a.m. so the zones finish before 10 a.m. See the SAWS watering rules for your day.
One common mistake: more than one start time. Each start time runs every zone again. If the lawn floods or the bill jumps, check for start times you did not mean to set.
Run a zone by hand
Turn the dial to MANUAL STATION. Pick the zone and the minutes. To stop it, turn the dial to OFF for three seconds.
Change every zone at once
Turn the dial to SEASONAL ADJUST. This changes all run times by a percent, from 5 up to 200. At 50 percent, a 10-minute zone runs for 5 minutes. Use it to cut back in fall and winter.
The rain sensor setting
Turn the dial to SENSOR. ACTIVE means the timer obeys the rain sensor. BYPASS means it ignores it. If the timer will not water after rain, check this first.
When something is wrong
Blank screen: power is not reaching the timer. Check the plug and the outlet.
It says it is watering but nothing runs: look for a water supply problem, a loose wire, or a rain sensor that is holding it off.
A short message on the screen: a valve solenoid or wire has a short.
The reset button sits in a small hole. Press it with a paper clip. Your programs stay saved.
Not sure what the screen is telling you? Reach out to the irrigation experts at SISCO Irrigation at 210-697-9086.
ESP-TM2 questions
How many programs does the ESP-TM2 have?
Three: A, B and C.
Why do my sprinklers run twice?
There is likely a second start time. Each start time runs all the zones again.
How do I turn the rain sensor off?
Turn the dial to SENSOR and choose BYPASS.
Will a reset erase my settings?
No. The manual says your schedules stay in memory.
Related pages
Start here: Sprinkler parts and models.
Also useful: Hunter Pro-C controller. Rain Bird 1800 spray head. Hunter PGP rotor.
Need help? Sprinkler repair in San Antonio.
Want it set for you?
We set every timer to your watering day on each repair visit. Repairs start from $150, depending on what your system needs. Reach out to the irrigation experts at SISCO Irrigation at 210-697-9086. See our controller guide for more.
