Skip to content

Homeowners with a Rain Bird ESP-Me

Rain Bird ESP-Me controller: settings and alert lights

The ESP-Me tells you what is wrong, if you know how to read its light.

Fix your sprinklers

What this timer can do

The Rain Bird ESP-Me has four programs, A to D. Each can hold up to six start times. It can run up to 22 zones, with added modules. Only one program runs at a time.

Leer en español

Most homes need program A and one start time. One start time runs every zone in turn.

The dial, in plain words

Auto Run: normal use. Leave it here.

Set Station Run Times: minutes for each zone, from 1 minute to 6 hours.

Water Start Times: when the program starts.

Water Days: by day of the week, odd days, even days or every so many days.

Seasonal Adjust: raises or cuts every zone by a percent.

Rain Sensor: sets the sensor to active or bypass.

Delay Watering: holds watering for up to 14 days.

Off: no watering.

Check your setup

  1. Press Program Select until the screen shows A.

  2. Dial to Water Start Times. There should be one.

  3. Dial to Set Station Run Times. Check each zone.

  4. Dial to Water Days. Turn on only your watering day.

  5. Dial back to Auto Run.

Then press Program Select and check B, C and D. A start time left in one of them makes the system run again. In San Antonio, match your day to the SAWS watering rules.

Seasonal adjust

Dial to Seasonal Adjust. Plus and minus change the number, from 5 to 200 percent. At 100, zones run as set. At 70, they run 30 percent less. It can apply to one program or to all.

The rain sensor setting

Dial to Rain Sensor. Plus or minus picks ACTIVE or BYPASS. On bypass, the timer ignores the sensor. Use it to test, then set it back to active.

Run it by hand

Leave the dial on Auto Run. Hold the right arrow button for 3 seconds. The program on the screen starts.

What the alert light means

Flashing: something is not set. The screen says which: no start times, no run times or no water days.

Solid: an electrical fault. The screen names the zone with the shorted wire. The timer skips that zone and waters the rest.

NO AC: the timer is not getting power. Check the outlet and the breaker.

A number and NOMOD: there is no module for that zone.

A solid light needs the wire and the valve checked. See our controller guide.

Questions

How many start times does the ESP-Me have?

Up to six in each of its four programs. Most homes need one.

Why is the alert light flashing?

A setting is missing. The screen says if it is start times, run times or water days.

Why is the alert light solid?

There is an electrical fault on a zone wire or the master valve wire.

Does the ESP-Me need a battery to keep its settings?

No. It keeps the date, time and programs without one.

Related pages

Start here: Sprinkler parts and models.

Also useful: Rain Bird ESP-TM2 controller. Rain Bird DV valve. Hunter PGV valve.

Need help? Sprinkler repair in San Antonio.

Need a hand?

Solid alert light, or a zone it keeps skipping? Reach out to the irrigation experts at SISCO Irrigation at 210-697-9086.