Skip to content

Texas builders

Do you need an irrigation plan in Texas? The state rule

Every new Texas system needs a sealed plan. Whether the city reviews it depends on where you build.

Fix your sprinklers
On this page

What an irrigation plan is

An irrigation plan is the scaled design drawing for a sprinkler system: where the zones are and how they are grouped, which heads go where, how the pipe is sized, and how the system protects the drinking water it connects to. A good plan makes a system water evenly, stay inside the rules, and pass review where review is required.

Leer en español

What Texas requires everywhere

Texas requires an irrigation plan for every new landscape irrigation system. The licensed irrigator seals, signs and dates it, and the plan stays on site during installation, with any changes marked in red. Repairs and alterations to an existing system do not need a new plan.

Whatever city you build in, a new system must also follow the state's design rules:

  1. Separate zones by plant type, sun and shade, slope and soil.

  2. Match the precipitation rate of every head within a zone.

  3. Keep spray off pavement, walls, fences and other hard surfaces, with heads at least 4 inches from hardscape.

  4. Include backflow protection between the system and the drinking water.

  5. Include a rain or moisture shut-off device on automatic systems, outside 14 Far West Texas counties.

  6. Include an isolation valve between the meter and the backflow preventer.

The plan must show the property, the zones and their flow, the controller and sensors, the water source and backflow device, the valves, pressure regulation, the pipe, and the irrigator's seal, signature and date.

What your city or water utility adds

Whether a plan must be reviewed before installation, whether a permit or inspection is required, and who reviews it are local questions. San Antonio is the example we know best: SAWS requires an approved plan before a new system is installed in its service area, and a passed inspection since 2026. See our irrigation plans page for how that works. Dallas requires a sprinkler permit, and Austin inspects new residential systems. Cities of 20,000 people or more must check that the irrigator who designs and installs a system is licensed. Ask your city's development services or your water utility before work starts.

Plans for projects anywhere in Texas

The state design rules are the same in every Texas city. Only the local review changes. SISCO draws and seals irrigation plans under license LI 31500. SISCO prepares plans for projects anywhere in Texas, submits them to the local reviewer and handles the compliance. Reach out to the irrigation experts at SISCO Irrigation at 210-697-9086.

When to call

Building anywhere in Texas? SISCO prepares the stamped plan, sends it to the local reviewer and answers the comments. Email service@siscoirrigation.com or call 210-697-9086.

Irrigation plan questions

Do I need an irrigation plan to install sprinklers in Texas?

Yes, for every new system. A licensed irrigator seals the plan. Whether the city or utility must also review and approve it depends on where you build.

Who can draw an irrigation plan in Texas?

A TCEQ-licensed irrigator designs and seals irrigation plans for pay. A homeowner may design a system for their own home. Some local reviewers set their own rules, so ask yours.

Does a plan drawn for another Texas city work here?

The design rules are statewide. But review is local. So the submission follows the local reviewer's process even if the drawing needs no changes.

Do repairs need a new irrigation plan?

No. Texas requires a plan for new systems, not for repairs, maintenance or alterations.

Start here: Irrigation plans in San Antonio.

Also useful: Irrigation plan review by Texas city. Texas irrigation rules in plain English. Irrigation plans for landscape architects.

Sources

Checked November 12, 2026: 30 Texas Administrative Code Chapter 344, including §344.30 and §344.62, and TCEQ's questions and answers for irrigators (tceq.texas.gov).

Have a sprinkler question? Reach out to the irrigation experts at SISCO Irrigation at 210-697-9086.