Texas homeowners
How to program a Hunter or Rain Bird sprinkler controller
Four settings: date and time, start times, run times, watering days. Use one program.
Fix your sprinklersOn this page
Every sprinkler controller has the same four settings
Whatever the brand, a watering program is made of four things: the current date and time, the start times, how long each zone runs, and which days it waters. Most schedule problems come from a second program left running or a start time that should not be there. Use one program unless you need a second for drip.
Before you start
Find your water company's rules: which day or days, and which hours. In San Antonio, see the SAWS watering rules. Elsewhere, your water bill names your water company. Then note how many zones you have and what each one waters.
The steps, on any controller
Set the current date and time, including a.m. or p.m.
Choose one program, usually A, and clear any others you do not use.
Set the start times: one start time runs every zone in order. So one or two is enough.
Set a run time for each zone, in minutes.
Set the watering days to "custom" or "days of the week" and pick only your allowed days.
Turn the dial back to "Run" or "Auto".
Good to know: a start time starts the whole program, not one zone. Setting a start time for every zone makes the system water again and again.
Hunter Pro-C
Turn the dial to each setting in turn: Current Date/Time, Start Times, Run Times and Water Days. The PRG button switches between programs A, B and C. Check that B and C have no start times unless you use them. Use the plus and minus buttons to change values and the arrow buttons to move between them, then return the dial to Run.
Rain Bird ESP-TM2
Turn the dial to Date/Time, Start Times, Run Times and Water Days. The Program Select button switches between programs A, B and C. On Water Days, choose custom days and turn off every day except yours. Return the dial to Auto Run.
For both, the model's own manual has the exact buttons. It is on the maker's website.
Settings worth knowing
Seasonal adjust changes every run time by a percentage, so you can cut back in cool months without reprogramming.
Rain delay pauses watering for a set number of days after rain.
Cycle and soak: on clay, use two start times with shorter run times so water soaks in instead of running off.
The rain sensor switch should be set to "active", not "bypass".
Controller programming questions
Why do my sprinklers run more than once?
Extra start times, or a second program with its own start times. Clear them so one program has one or two start times.
How many start times do I need?
One runs every zone in order. Add a second only to split watering into two cycles.
How do I set my sprinklers to water one day a week?
Set Water Days to custom days and select only your allowed day.
Why did my controller lose its program?
A power cut with a dead backup battery, or a reset. Re-enter the four settings.
Related pages
Start here: All sprinkler guides.
Also useful: Orbit sprinkler head or valve leaking. Sprinkler head broke off. Anti-siphon valve vs backflow preventer.
Need help? Sprinkler repair in San Antonio.
Need a hand?
SISCO reprograms controllers across Greater San Antonio, Boerne and New Braunfels. Reach out to the irrigation experts at SISCO Irrigation at 210-697-9086 or see our controller guide.
