Skip to content

Builders, irrigation contractors and homeowners

As-built irrigation plans: what they are and who asks

The plan shows what was meant. The as-built shows what is in the ground.

Fix your sprinklers

What an as-built is

A sprinkler plan is drawn before the job. Then the crew meets a tree root, a gas line or a change of mind. A valve moves. A zone is split. The as-built is the plan fixed up to show what was really built.

Leer en español

Why it matters

For the owner: it is a map. Years later, it shows where the valves, pipes and wires are. That makes each repair faster.

For the builder: it is proof the system matches what was approved.

For the inspector: it is what the system is checked against.

What Texas asks for

Texas rules have the irrigator give the owner a plan that shows the system as it was put in. It is part of finishing the job, along with a walk-through, a care checklist and a sticker on the controller.

What cities add

Last checked: November 12, 2026.

Fort Worth: the as-built must be on site, with each change marked in red.

Corpus Christi: a set of as-built plans for the owner is on the city's inspection form.

Georgetown: as-built plans are required when the job has a new water service or meter.

San Antonio: SAWS inspects the system against the approved plan. If the two do not match, one of them has to change.

How a plan becomes an as-built

  1. Keep the plan on site during the job.

  2. Mark each change on it, in red, the day it is made.

  3. Note what moved: heads, valves, pipe runs, the controller.

  4. Send the marked plan to the irrigator who sealed it.

  5. The plan is redrawn and given to the owner.

How SISCO helps

When we draw your plan, send us the marked-up copy at the end. We revise the plan to show what was built. If a reviewer asked for the change, we send the new plan back to them.

Questions

What is an as-built irrigation plan?

A plan that shows the sprinkler system the way it was really installed, with every change from the design.

Who gets the as-built plan?

The owner. Some cities also want to see it on site or get a copy.

What if my system does not match the plan?

Either the system is changed to match, or the plan is revised to show what was built.

I never got a plan for my system. Can I get one?

Ask the company that put it in. If you cannot reach them, call us and we will tell you what can be done.

Related pages

Start here: Irrigation plans in San Antonio.

Also useful: Sample irrigation plan. Irrigation plans anywhere in Texas. Texas irrigation license.

Need a plan updated?

Email service@siscoirrigation.com with the plan and the changes. Or reach out to the irrigation experts at SISCO Irrigation at 210-697-9086, Monday to Friday, 7:30 a.m. to 4:30 p.m.