Skip to content

San Antonio homeowners

San Antonio sprinkler questions, answered

Short, straight answers about repairs, watering days, backflow tests and freezes.

Fix your sprinklers
On this page

About repairs

**How much does sprinkler repair cost in San Antonio?** At SISCO, repairs start from $150, depending on what your system needs. You get the price before any work starts.

Leer en español

Who can legally repair my sprinkler system? A licensed irrigator or a technician working under one. SISCO's license is LI 31500. You may repair your own home's system yourself.

How fast can someone come out? It depends on the schedule. Call 210-697-9086 for the next open appointment, Monday to Friday.

Is there a warranty? Yes, one year on our repair work.

Should I repair or replace my system? Repair, in most cases. Replace when pipe fails in many places or the layout never covered the lawn.

About watering days

What day can I water in San Antonio? Under SAWS, by the last digit of your address: 0 or 1 Monday, 2 or 3 Tuesday, 4 or 5 Wednesday, 6 or 7 Thursday, 8 or 9 Friday.

What stage is San Antonio in? See our SAWS watering rules page for the current stage and the date we last checked.

What is the fine for watering on the wrong day? SAWS adds a water waste charge to the bill: $137 for the first at a single-family home, waivable with an online course.

Can I hand water any day? Yes, with a hose, bucket or watering can, any day and any time under SAWS.

I am not on SAWS. Whose rules apply? Your water provider's. See find your water provider.

About backflow, leaks and freezes

Do I need a backflow test every year? Yes, under SAWS, on every lawn irrigation system, by a licensed tester. SISCO does not test; we can arrange an inspection.

Will SAWS lower my bill after a leak? It considers a leak adjustment if you ask within 60 days of the repair, with a receipt.

How do I protect my system from a freeze? Drain and wrap the backflow preventer and turn the controller off. See our freeze guide.

Do I need SAWS approval for a new system? Yes: an approved plan before installation and a passed inspection. See our irrigation plans page.

The quick check for any problem

  1. Make sure the controller has power and is not on "off" or rain delay.

  2. Flip the rain sensor switch to bypass and try a zone.

  3. Check the isolation valve before the backflow preventer is open.

  4. With everything off, watch the water meter for movement.

  5. Run each zone and note what misbehaves.

Most-asked questions

Why won't my sprinklers turn on?

Usually the controller is off or in rain delay, the rain sensor is holding the system off, or the isolation valve is closed.

Why is one zone not working?

Usually its valve, solenoid or wire. See our zone guide.

Why is my water bill so high?

A leak, or a controller watering more than you think. Do the meter test.

Why does my lawn have dry spots?

Usually coverage: a clogged, tilted or blocked head, or low pressure on that zone.

Start here: Our service area.

Also useful: Moving sprinklers for a pool, patio or fence. About SISCO and our licensed irrigator. Sprinkler repair in San Antonio.

Need help? Request sprinkler service.

Still have a question?

Reach out to the irrigation experts at SISCO Irrigation at 210-697-9086, Monday to Friday, 7:30 a.m. to 4:30 p.m., or see sprinkler repair in San Antonio and our guides.