Texas homeowners
Why do sprinkler heads stay up after the zone shuts off?
Usually grit in the seal. If water is still trickling out, the valve hasn't closed.
Fix your sprinklersOn this page
How a pop-up head is meant to work
Water pressure pushes the riser up, and a spring pulls it back down when the zone shuts off. A head that stays up is being held by something: dirt, a worn part, or water pressure that has not gone away. Heads left standing get broken by mowers and feet. So it is worth fixing.
The usual causes
Grit in the seal: sand or soil between the riser and the wiper seal jams it. This is the most common cause.
A worn spring or seal: on an old head, the spring weakens and the riser sticks partway.
Grass and soil around the cap: thatch grown tight around the head holds the riser.
The valve has not closed: if water still trickles from the head, pressure is holding it up. That is a valve problem, not a head problem.
A bent or damaged riser: after a hit from a mower.
How to free a stuck head
With the zone off, push the riser down by hand. If it drops and stays, it was grit.
Run the zone, then step on the riser gently a few times to flush the seal.
Clear grass and soil from around the cap.
Unscrew the cap, pull the riser assembly and rinse the seal and spring.
If it still sticks, replace the head with the same type and nozzle.
If water keeps coming out
Water seeping from a raised head with the zone off means the zone valve is not sealing, usually from debris under its diaphragm. See our valve guide. If it is only the lowest head on a slope and it stops after a few minutes, that is the pipe draining, and a check-valve head fixes it.
Stuck head questions
Why won't my sprinkler head go down?
Most often grit in the seal. A worn spring or a valve that has not closed are the other causes.
Can I spray lubricant on a sprinkler head?
Avoid oil-based sprays, which can swell the seal. Rinse it with water instead.
Is it worth repairing a stuck head?
Cleaning is. If the spring or seal is worn, replacing the head is quicker.
Why do all the heads on one zone stay up?
Pressure is still on that zone: the valve has not closed.
Related pages
Start here: All sprinkler guides.
Also useful: How to turn off a sprinkler system. Drip irrigation maintenance. How to move or cap a sprinkler head.
Need help? Sprinkler repair in San Antonio.
Need a hand?
SISCO repairs heads and valves across Greater San Antonio, Boerne and New Braunfels. Reach out to the irrigation experts at SISCO Irrigation at 210-697-9086 or see our sprinkler head guide.
