Skip to content

Texas homeowners

How to turn off a sprinkler system

Controller "off" stops the schedule. The isolation valve stops the water.

Fix your sprinklers
On this page

Two different kinds of "off"

Turning a sprinkler system off can mean stopping the schedule or stopping the water. For rain or a trip away, stop the schedule. For a leak, a stuck valve or a freeze, stop the water.

Leer en español

Stop the schedule: the controller

Turn the dial or press the button to "Off". The program stays saved, and nothing runs until you turn it back to "Auto" or "Run". For a few days of rain, use "rain delay" instead, which restarts on its own. Do not unplug the controller: older ones lose their program.

Stop the water: the isolation valve

  1. Find the backflow preventer, the brass assembly where the sprinkler line leaves the meter or the house.

  2. Find the shutoff on the pipe just before it, on the meter side.

  3. Turn the handle a quarter turn so it sits across the pipe.

  4. Run a zone briefly from the controller to release the pressure.

If there is no separate handle, the first ball valve on the backflow preventer itself does the job. Texas requires an isolation valve on new systems. But some older systems have none.

Last resort: the water meter

If you cannot find or turn the isolation valve, shut the water off at the meter box by the curb. This turns off the house too. So use it only to stop a leak until help arrives.

Which "off" to use

Rain or a wet week: controller rain delay or "Off".

Water running with the controller off: isolation valve. A zone valve is stuck open or the main line has a break.

A geyser from a broken head: controller "Off" is enough.

A freeze: controller "Off", then the isolation valve, then drain and wrap the backflow preventer. See our freeze guide.

Away for the season: controller "Off". Close the isolation valve too if the system will sit unused.

Shut-off questions

How do I turn off my sprinklers quickly?

Turn the controller to "Off". If water still runs, close the isolation valve before the backflow preventer.

Where is the sprinkler shut-off valve?

On the sprinkler line between the water meter and the backflow preventer, sometimes in a box in the ground.

Why are my sprinklers running with the controller off?

A zone valve is stuck open or was opened by hand. Close the isolation valve, then see our valve guide.

Should I unplug the controller?

No. Use "Off". Older controllers lose their program without power.

Start here: All sprinkler guides.

Also useful: When to turn sprinklers off and back on in Texas. Drip irrigation maintenance. Hose-end sprinklers and watering rules. Sprinkler heads stay up.

Need help? Sprinkler repair in San Antonio.

Need a hand?

SISCO repairs systems across Greater San Antonio, Boerne and New Braunfels. Reach out to the irrigation experts at SISCO Irrigation at 210-697-9086 or see sprinkler repair.