Skip to content

San Antonio builders and homeowners

Failed the SAWS irrigation inspection? What to do next

A failed inspection is a punch list. Fix each item, then ask SAWS to come back.

Fix your sprinklers

What the inspection is

Since January 1, 2026, SAWS inspects every new sprinkler system. An inspector runs the system and checks it against the approved plan. If something does not match, the system does not pass. Last checked: November 12, 2026.

Leer en español

What a fail holds up

SAWS can keep a hold on the water account until the system passes. It also will not approve extra watering for new grass. New sod then has to live on the normal watering day. For a builder, that can reach the closing date.

The common fails, and the fix

Heads too close to pavement. Each head must sit at least 4 inches from walks and drives. The fix: move the head back.

Heads too far apart. Spacing must be within 10 percent of the plan. The fix: add or move heads.

Spray on the street, or mist. Mist means the pressure is too high. The fix: set the heads, change nozzles or add pressure control.

Water draining from a low head. The fix: check valves at the low points.

Rain sensor missing or dead. The fix: fit one that works.

Thin soil under new sod. SAWS looks for 4 inches or more. This one is the hardest to fix late, so check it before the sod goes down.

Papers missing at the timer. The fix: put the plan and the system papers at the controller.

System does not match the plan. The fix: change the system, or have the plan revised to show what was built and sent back to SAWS.

Getting to a pass

  1. Get the inspector's list in writing.

  2. Fix every item, not just the first.

  3. Run each zone and check it against the plan.

  4. Ask SAWS for a new inspection.

  5. Once you pass, file for the new-lawn variance.

How SISCO helps

Call us with the list. We fix what the inspector flagged. If the plan needs to change, we revise it, seal it and send it back to SAWS. Repairs start from $150, depending on what your system needs. See irrigation plans in San Antonio.

Questions

What does the SAWS irrigation inspection check?

Head placement and spacing, spray and pressure, check valves, the rain sensor, soil depth under new sod and the papers at the timer.

What happens if my system fails?

SAWS can hold the water account and will not approve extra watering for new grass until it passes.

Does this apply to my older system?

No. The inspection is for systems put in since January 1, 2026.

Who do I call at SAWS?

SAWS Conservation, at 210-704-7283.

Related pages

Start here: SAWS questions and answers.

Also useful: SAWS steps for home builders. SAWS new-landscape variance. How to read your SAWS bill.

Need help? Sprinkler repair in San Antonio.

Need a hand?

Send us the inspector's list. Reach out to the irrigation experts at SISCO Irrigation at 210-697-9086.