San Antonio homeowners
Sprinkler system won't turn on? Seven things to check
No zone will run? It is usually power, a setting or a closed valve. Check these seven things first.
Fix your sprinklersWhen nothing runs at all
One dead zone is a zone problem. When no zone runs, the cause is something they all share. That means the timer, the rain sensor or the water supply. This happens most in spring, after the system sat all winter.
Seven things to check
Look at the timer screen. Blank means no power.
Check the dial or the app. Is it set to off?
Find the rain sensor switch. Try it on bypass.
Check the date, the start time and the water days.
Run one zone by hand from the timer.
Check the water valves at the backflow device.
Listen at the valve box while a zone is on.
The timer has no power
A blank screen means the timer is not getting power. Check that it is plugged in. Press the reset button on the outlet. Check the breaker. If the screen says NO AC, it is the same thing: no power is reaching it.
The timer is on but will not water
It is set to off. Turn the dial back to run, or auto.
The rain sensor is holding it off. A worn sensor can act wet when it is dry. Flip the switch to bypass and try a zone. If it runs now, the sensor needs to be replaced.
The schedule is gone. A long power cut can wipe some timers. Check the date, the start time, the run times and the water days.
The timer runs but no water comes out
This points to the water. Find the backflow device. It is the brass part above ground, most often near the meter or the side of the house. It has two small handles. A handle in line with the pipe is open. A handle across the pipe is closed. Someone may have closed them for winter.
Open each one slowly. Water that rushes in can harm the device.
Some systems also have a master valve. It opens each time a zone runs. If it fails, every zone stays dry. That one is a job for us.
When to stop and call
Stop if you see water coming up from the ground, or the backflow device is leaking or cracked. Shut the handles and call. Repairs start from $150, depending on what your system needs.
One zone dead, but the others fine? See our zone guide. Timer trouble? See our controller guide.
Questions
Why won't my sprinklers turn on after winter?
Most often a water valve at the backflow device is still closed, or the timer is still set to off.
The timer says a zone is running, but nothing happens. Why?
The timer has power but water is not reaching the valves. Check the handles at the backflow device.
Can a rain sensor stop the whole system?
Yes. A stuck sensor holds every zone off. Put it on bypass to test.
What does NO AC mean on my timer?
The timer is not getting power. Check the plug, the outlet and the breaker.
Related pages
Start here: All sprinkler guides.
Also useful: Water pooling around a sprinkler head. Sprinkler damage after a contractor dug. Foundation watering in San Antonio.
Need help? Sprinkler repair in San Antonio.
Need a hand?
If the list does not get it going, reach out to the irrigation experts at SISCO Irrigation at 210-697-9086.
