Skip to content

Builders and irrigators

SAWS irrigation plan checklist: what the review looks for

Ten checks decide whether SAWS approves your irrigation plan or sends it back.

Discuss a plan
On this page

What SAWS checks on every irrigation plan

Every irrigation system built in the SAWS service area since January 1, 2025 needs a plan stamped by a licensed irrigator and approved by SAWS before installation. SAWS reviews each plan against a checklist, with a goal of five business days, and returns it with a list of anything that fell short. The clock restarts when you resubmit, so the first submission matters most.

Leer en español

The checklist

1. The seal: a TCEQ-licensed irrigator's seal. Unsealed drawings come back.

2. Head arcs: drawn, so coverage can be judged.

3. Pipe sizes: mainline and lateral sizes on every section, not only in a legend.

4. Scale: both a numerical and a graphical scale.

5. Pressure regulation: the method stated on the plan, with the regulating parts in the legend. This is the most common omission.

6. One precipitation rate per zone, within 15 percent. No spray heads with rotors, spray with bubblers, or drip with bubblers on one zone.

7. Hydrozoning: trees, shrubs and turf on separate zones.

8. Property details: the meter number or property address, and owner or builder contact details.

9. A legible PDF: low-resolution scans come back.

10. Size: residential plans must cover under 10,000 square feet of irrigated area.

How to submit a plan that passes

  1. Check the drawing against all ten items before sealing it.

  2. State the pressure regulation method on the plan itself.

  3. Confirm the meter number or address matches SAWS records.

  4. Export a clean, high-resolution PDF.

  5. Submit through SAWS's online form and watch for the emailed result.

After approval: the inspection

Since January 1, 2026, the installed system must also pass a SAWS operational inspection. The inspector checks that the system matches the approved plan: heads at least 4 inches from pavement, spacing within 10 percent, no overspray or misting, check valves at low points, a working rain sensor, at least 4 inches of prepared topsoil, and the paperwork packet at the controller.

Checklist questions

Why did SAWS return my irrigation plan?

Most often for a missing pressure regulation statement, mixed precipitation rates in a zone, missing arcs or pipe sizes, no scale, or a low-resolution file.

How long does SAWS take to review a plan?

Its stated goal is five business days. The clock restarts on resubmission.

Who can seal a plan for SAWS?

A TCEQ-licensed irrigator.

Is the SAWS review the same as the city permit?

No. The City of San Antonio irrigation permit is a separate rule.

Start here: Irrigation plans in San Antonio.

Also useful: SAWS returned your irrigation plan. Texas irrigation plan requirements checklist. Sprinkler system permit in San Antonio.

Have SISCO prepare it

SISCO prepares, seals and submits plans and handles SAWS comments. See our irrigation plans page, reach out to the irrigation experts at SISCO Irrigation at 210-697-9086 or email service@siscoirrigation.com.