Texas homeowners
How to find your sprinkler valves
Start near the backflow preventer and the edges of the lawn, and probe for the hard plastic lid.
Fix your sprinklersOn this page
Why valves go missing
Each zone has a valve, and valves sit in boxes in the ground with a green or black lid. Over the years the lids disappear under grass, mulch and soil. You need the valve when a zone will not start or will not stop. So it is worth finding them all once and marking them.
Where valves usually are
Near the backflow preventer and the water meter. Along the side of the house, close to where the controller's wire leaves the wall. At the edges of the lawn and in beds, where installers could dig easily. Often several are grouped in one box, called a manifold. Large yards may have boxes spread out, one near each zone.
How to find them
Look for a flat lid or a slight rectangular dip in the turf near the backflow preventer.
Follow the line from the controller's wire toward the yard. Valves lie along it.
Run a zone and listen for the hiss of water and the click of the valve.
Probe gently with a screwdriver for a flat, hollow-sounding lid a few inches down.
Check the irrigation plan or as-built drawing if you have one. It shows every valve.
Good to know: probe gently. The valve, its wires and the pipe are just below the lid.
Finding a valve by its zone
Run the zone and walk toward the head nearest the house or the water source: the valve is usually upstream of the first head. When the zone shuts off, the valve clicks, and a helper at the controller turning it on and off makes that easier to hear.
When nothing works
Irrigation technicians use a wire locator, which traces the valve wire underground from the controller to the valve. It finds valves that are deep, under mulch or in odd places. It finds cut wires too.
Once you find them
Clear the lid, cut the turf back, and raise the box if it has sunk. Note which valve runs which zone, and sketch a map for next time. Keep soil out of the box so the valve stays visible and dry.
Questions
Where are sprinkler valves usually located?
In boxes in the ground near the water source, along the side of the house, or at the lawn's edges.
How do I find a buried sprinkler valve box?
Probe gently near the backflow preventer and along the wire path, and listen while a zone runs.
How many valves does my system have?
One per zone. Count the zones on your controller.
Can a professional find a lost valve?
Yes, with a wire locator that traces the valve wire from the controller.
Related pages
Start here: All sprinkler guides.
Also useful: Sprinkler wiring problems. Rain sensor not working. High water bill from sprinklers.
Need help? Sprinkler repair in San Antonio.
Need a hand?
SISCO locates and repairs valves across Greater San Antonio, Boerne and New Braunfels. Reach out to the irrigation experts at SISCO Irrigation at 210-697-9086 or see our valve guide.
