Skip to content

Texas homeowners

Backflow prevention in Texas, in plain terms

Got a backflow test letter? It's real, and only a licensed tester can do it.

Fix your sprinklers
On this page

What a backflow preventer does

Most sprinkler systems connect to the same water you drink. The backflow prevention assembly, usually a brass device above ground near the meter, is the one-way gate that keeps sprinkler water from flowing backward into your home's drinking water when pressure drops. Texas rules require backflow protection on every irrigation system connected to drinking water, and an isolation valve between the meter and the backflow preventer.

Leer en español

Testing: what the state requires and what your utility adds

Under Texas rules, a backflow preventer must be tested when it is installed, before the system goes into service, and devices in health-hazard settings must be tested every year. The result goes to the water utility and the owner within 10 business days. Many water companies go further and require a test every year on all irrigation assemblies. They mail the notice. The test must be done by a licensed Backflow Prevention Assembly Tester, a separate license from an irrigator's.

What to do when the testing letter arrives

  1. Read the deadline and your water company's instructions. Many keep a list of registered testers.

  2. Hire a licensed backflow prevention assembly tester.

  3. Keep the paperwork, or the tester's confirmation that the report was filed.

  4. If the device fails, ask the tester whether it can be repaired or must be replaced.

Good to know: the letter is real. In San Antonio, SAWS sends home reminders through its contractor BSI. See our SAWS page for that process. Elsewhere, your water company's letter names its process.

Backflow preventers and freezes

Sitting above ground and full of water, the backflow preventer is one of the parts most exposed in a freeze. Drain and wrap it by its manual before a hard freeze.

When to call

SISCO does not test backflow assemblies. In Greater San Antonio, Boerne and New Braunfels, we can arrange a backflow inspection with a licensed tester and repair the sprinkler system around it. Call 210-697-9086.

Backflow questions

Is backflow testing required in Texas?

Texas requires a test when the device is installed, and yearly tests in health-hazard settings. Most water companies set their own schedule on top, often once a year. Your water company's notice is the authority.

Who can test a backflow preventer?

Only a licensed Backflow Prevention Assembly Tester. An irrigator license alone does not cover testing.

What happens if I skip the test?

Utilities can treat a missing test as a compliance problem on your water account. The letter states the consequence and the deadline.

Can I test my own backflow preventer?

No. The test uses calibrated gauges, and the utility accepts a licensed tester's report.

Start here: All sprinkler guides.

Also useful: Rain sensors in Texas. How much to water a Texas lawn. Winterize a sprinkler system for a Texas freeze.

Need help? Sprinkler repair in San Antonio.

Sources

Checked November 12, 2026: 30 Texas Administrative Code Chapter 344 and TCEQ's questions and answers for irrigators (tceq.texas.gov).

Have a sprinkler question? Reach out to the irrigation experts at SISCO Irrigation at 210-697-9086.