Skip to content

San Antonio homeowners

Sprinkler system installation in San Antonio

A new system in San Antonio needs a SAWS-approved plan first. We draw it, seal it and submit it.

Fix your sprinklers
On this page

A new sprinkler system in San Antonio starts with a plan

Since January 1, 2025, every new sprinkler system in the SAWS area needs a plan before it goes in. A licensed irrigator must stamp it, and SAWS must approve it. Since January 1, 2026, the installed system must also pass a SAWS inspection, or the water account can be held. SISCO prepares and submits the stamped plan. We install new systems as crew availability allows. Licensed irrigator LI 31500.

Leer en español

What every new Texas system must include

Backflow protection between the system and your drinking water, with an isolation valve ahead of it.

A rain or moisture sensor on automatic systems.

Zones by plant type: lawn, beds and trees on separate zones, with matched heads in each zone.

No spray on hard surfaces, with heads at least 4 inches from pavement.

A sealed irrigation plan, kept on site during installation.

The steps to a new system

  1. Call 210-697-9086 and tell us about the property.

  2. We design the system and prepare the stamped irrigation plan.

  3. We submit the plan to SAWS and answer its comments until it is approved.

  4. The system is installed to the approved plan.

  5. SAWS inspects the installed system.

What makes a system last

Good design matters more than brand. You want enough zones so none runs weak. Heads should overlap. Beds should get drip. The pressure should be set right, and the pipe sized for the flow. A system designed this way waters evenly on one day a week, which is what SAWS drought stages allow.

New lawns and watering rules

SAWS can allow extra watering for up to five weeks while new grass takes root. This is called a new-landscape variance. But only once the plan is approved and the inspection is passed. See the SAWS watering rules.

Installation questions

Do I need SAWS approval to install a sprinkler system?

Yes. Every new system in the SAWS area needs a stamped, approved plan before it goes in. It needs a passed inspection after.

Who can install a sprinkler system in Texas?

A licensed irrigator, or a technician working under one. Homeowners may install at their own home but must follow the same rules.

Does SISCO install new systems?

Yes, as crew availability allows. We also prepare the stamped plan for systems others install.

Can I add zones to my existing system instead?

Often, yes. Adding or splitting zones is a repair-type job; see sprinkler repair.

Start here: Our service area.

Also useful: Commercial irrigation repair. Sprinkler repair Shavano Park. Backflow testing in San Antonio.

Need help? Request sprinkler service.

Start with a call

Reach out to the irrigation experts at SISCO Irrigation at 210-697-9086 or see our irrigation plans page.