Skip to content

Homeowners

Irrigation plans for Bulverde and Spring Branch

Large Hill Country lots and strict water rules call for a careful plan. We draw it and seal it.

Fix your sprinklers

What Bulverde and Spring Branch ask for

Texas law is the starting point. Every new sprinkler system needs a plan drawn and sealed by a licensed irrigator, and a copy must be on site during the work. Ask your city or county permit office what it wants with the application. Tell us, and we prepare the plan to meet it.

Leer en español

SISCO draws and seals plans under Texas license LI 31500.

What a sealed plan shows

The state sets what the plan must show. It is drawn to scale and carries the irrigator's seal, signature and date. It shows the water meter, the backflow device, the controller and the rain and freeze sensor. It shows every valve, head and drip line, the main line and the pipes that feed each zone, and the design pressure. See Texas irrigation plan requirements.

Why the plan matters more out here

A three-hour window. Texas Water Company allows watering only from 7 to 10 a.m. or 7 to 10 p.m. on your day. Every zone has to fit inside it.

Fewer days as the stage rises. Watering drops to once a week, then once every two weeks, then none. A plan that leans on drip and tough plants holds up better.

Large lots. Long pipe runs lose pressure. The plan sizes the pipe so the far zones still work.

Rock. Much of the ground is limestone. The plan sets routes that can be dug.

See Texas Water Company watering rules.

Residential irrigation plans in Bulverde and Spring Branch

Building on acreage? Send us the site plan and the landscape plan. We decide what to water and what to leave, lay out the zones for the three-hour window, and seal the plan.

Tell us what the city or your reviewer asks for. We prepare the plan to meet it.

Commercial irrigation plans in Bulverde and Spring Branch

Shops, offices and shared areas need a sealed plan too. On a large site with little water, drip and careful zoning matter even more.

Send us the site plan and the landscape plan. Tell us what the city or your reviewer asks for. We prepare the plan to meet it. See irrigation plans for commercial sites.

How it works with SISCO

  1. Email the site plan and the landscape plan to service@siscoirrigation.com.

  2. Tell us the water company, the meter size and the pressure, if you know them.

  3. We draw the plan and seal it under license LI 31500.

  4. Your installer files the plan with the permit, where one is needed.

Bulverde and Spring Branch plan questions

Does a home on acreage need a sealed plan?

Yes, if it gets a new sprinkler system. Texas requires a sealed plan for every new system in the state.

Should the whole lot be watered?

Usually not. With the water rules here, most owners water a small area near the house and leave the rest natural.

Who is my water company?

Texas Water Company serves most of the area. Your bill or the builder's paperwork will say.

Who can seal the plan?

A Texas licensed irrigator. SISCO seals plans under license LI 31500.

Send us one Bulverde or Spring Branch project

Reach out to the irrigation experts at SISCO Irrigation at 210-697-9086. Or ask for a plan quote. For repairs to a system already in the ground, see sprinkler repair in Bulverde and Spring Branch.