Skip to content

Texas homeowners

How much water pressure does a sprinkler system need?

Spray heads want about 30 psi and rotors about 45. A cheap gauge on a faucet tells you what you have.

Fix your sprinklers
On this page

The numbers, as a rough guide

Spray heads are made to work at about 30 psi, and rotors at about 45 psi, measured while the zone is running. The pressure at your faucet with nothing running is higher than that. That is because the backflow preventer, the valve and the pipe each take some away. These are general figures; the head's maker lists the exact range.

Leer en español

Pressure and flow are different things

Pressure is how hard the water pushes. Flow is how much water there is. A zone needs both. A system with good pressure can still run weak if a zone has more heads than the supply can feed.

How to measure your pressure

  1. Buy a pressure gauge that screws onto a hose faucet.

  2. Turn off all water in the house.

  3. Screw the gauge onto an outdoor faucet near the meter and open the faucet fully.

  4. Read the gauge: that is your static pressure.

  5. Repeat at a busy time, such as early morning, to see how far it drops.

If pressure is too low

Heads barely pop up, rotors do not turn, and the far end of the zone stays dry. Check that the isolation valve and the backflow preventer's valves are fully open, look for a leak, and count the heads on the zone. Fixes include splitting an overloaded zone, switching to rotary nozzles that use less flow, or watering at a quieter time of day. See our leak and low pressure guide.

If pressure is too high

Spray heads throw a fine mist that drifts away, fittings fail early, and valves slam shut with a bang. The fix is regulation: pressure-regulating spray bodies, a pressure-regulating valve, or a regulator on the line.

Why it varies through the day

Mains pressure dips when a whole neighborhood waters in the same allowed hours, which is common under once-a-week rules. If your system is marginal, run the weakest zones at the quieter end of your window.

Pressure questions

What water pressure do sprinklers need?

About 30 psi at spray heads and about 45 psi at rotors, as a rough guide.

How do I test my sprinkler water pressure?

Screw a pressure gauge onto an outdoor faucet with all other water off.

Why are my sprinklers misting?

Pressure is too high for the nozzles. Pressure-regulating bodies fix it.

Why is my pressure low only on one zone?

A leak, a partly closed valve, or too many heads on that zone.

Start here: All sprinkler guides.

Also useful: Sprinklers won't turn off. Brown spots in the lawn. Sprinkler system inspection checklist.

Need help? Sprinkler repair in San Antonio.

Need a hand?

SISCO diagnoses pressure problems across Greater San Antonio, Boerne and New Braunfels. Reach out to the irrigation experts at SISCO Irrigation at 210-697-9086 or see sprinkler repair.