Texas homeowners
Sprinkler valves in Texas: hard water, freezes and rules
A valve fails the same way in every Texas city. What you may do about it does not.
Fix your sprinklersWhat Texas does to a valve
A sprinkler valve is a simple part. A rubber seal opens and closes. Two things in Texas wear it out early.
Hard water. In Central and West Texas, the water is full of minerals. They leave a crust inside the valve. A valve that closes late often just needs that crust cleaned off.
Freezes. Valves near the surface can crack in a hard freeze. Water in the valve box in spring is the sign.
Who may fix a valve in Texas
You may work on the sprinklers at your own home. No license is needed. Anyone you pay must be a licensed irrigator, or work under one.
One city wants a permit
In El Paso, replacing or adding a control valve counts as a major repair. It needs a city permit. Most Texas cities do not ask for a permit for a valve repair. Ask yours if you are not sure.
What to check first
Find the valve box for the zone.
Check that the solenoid on top is snug.
Check that the small bleed screw is closed.
Look for water standing in the box.
Note if the zone will not start or will not stop.
For the full steps to clean or rebuild a valve, see our valve guide.
Questions
Why do valves stick in Texas?
Hard water leaves scale inside, and grit gets under the rubber seal.
Can I repair my own sprinkler valve in Texas?
Yes, at your own home. Paid work needs a licensed irrigator.
Do I need a permit to replace a valve?
In El Paso, yes. In most Texas cities, no.
Can a freeze crack a valve?
Yes, if the valve sits near the surface and holds water.
Related pages
Start here: All sprinkler guides.
Also useful: Sprinkler leaks and low pressure in Texas. Sprinkler head problems in Texas. How much to water a Texas lawn.
Need help? Sprinkler repair in San Antonio.
Need a hand?
In Greater San Antonio, Boerne or New Braunfels, reach out to the irrigation experts at SISCO Irrigation at 210-697-9086.
